欢迎光临高温电阻炉厂家 - 洛阳高温电阻炉厂家

洛阳电炉 www.LyLuye.com

高温电阻炉实力制造商

20年高温电阻炉经验,50多项技术专利

全国免费咨询热线

400-600-3293

1100度双温区管式\1100℃ TWO ZONE TUBE FURNACES

厂家:未知 发布日期::2020-09-16 08:33 浏览次数:

Sigma 1200 ℃ vacuum tube furnace is a new type of integrated vacuum atmosphere tube furnace with high performance and high energy saving developed by advanced technology. It can be used as single tube, double tube, horizontal, openable, vertical, single temperature zone, double temperature zone and three temperature zone.

Two Zone Tube Furnace Suppliers

Sigma 1100℃ TWO ZONE TUBE FURNACES

   Furnace structure

  • Double wall steel casing with forced air cooling.
  • Two cooling fan inside to keep temperature of outside case < 70 ºC
  • High purity alumina fibrous insulation for max energy saving
  • One sliding rail to support flange to load sample at easy
  • Two heating zone to achieve longer constant temperature zone or a certain temperature gradient.

Input voltage

220VAC Single phase

power

5500 W

 

Fused quartz tube size

8.5" O.D x 8.2" I.D x 40" Length
 One quartz tube is included, and spare tube is available as option

Heating element

NiCrAl Resistance Wire

Working Temperature

  • Max. heating temperature: 1100°C
  • Continuous working temperature: 400 -1000°C
  • Max. heating rate: 10°C/min

 

Heating zone

  • Total heating zone length 600 mm (24")
  • Two zones: 300 mm + 300 mm (12" per zone)
  • Constant temperature zone: 300 mm (if three zones are in the same temperature)

 

 

Temperature controller

  • Two precision temperature controller with PID function and 30 segments program.
  • One extra temperature monitor is built in to shutdown power when temperature out of control .
  • K type  thermocouple installed.
  • Temperature accuracy: ±1°C
  • Software and PC interface module is available at extra cost
  • Optional: PC interface & software

Vacuum Flange and gas feedthrough ports

  • Vacuum sealed stainless steel flanges with double high temperature silicon O-ring are included to achieve high vacuum  (Usually 10-2torr by mechanical pump and 10-4torr by molecular pump ).  Vacuum pump is not included.
  • Right-side flange is hinge-type and  KF25 vacuum port. KF25 Vacuum Right-Angle Valve  and 1.2 meter long KF-40 Flexible Stainless Steel Vacuum Hose are included. 
  • One 1/4" diameter feedthrough port is in built.
  • one flange to insert a thermocouple to calibrate furnace temperature. ( please order 36" length x 1/4"dia  K type thermal couple to insert the feedthrough at related product or click underlined )
  • One quartz block is included, which must put right end of tube to block heat radiation
  • Left-side flange is installed on slide able table to make movement easy.  There are five stainless steel feed though pipes and needle valve installed on the flanges to feed multi-CVD gases.  
  • 4 pcs quartz plate is built in left side.    

Product dimension

  • Furnace:  660 L x 700 W x 1060 H  mm
  • Sliding Table: 350 mm L
  • Note: You must put furnace and sliding table on flat surface.  Must make good alignment between sliding flange and furnace ( We ship sliding table and furnace separately

Certificate

   CE certified

Note:  Size can be customized as per our customers’ requirement

  • 11000C Vacuum Tube Furnace
  • 12000C Split Tube Furnace

    Split Tube Furnace Exporters

     Furnace structure

    • Double layer steel case with two cooling fan, which ensure low surface temperature.
    • Energy saving high purity fibrous alumina liner and insulation.
    • High purity Al2O3 coating.

     Power

     4 KW

     Voltage

      AC 208-240V Single Phase, 50/60 Hz , Power cord is included without plug.

     Temperature range

       100~1100° C (Continuous); 1200° C (<1 hour) 

     Max. Heating Rate

     ≤ 20° C /min

     Tube Size

    3.15"Dia. x 2.83" I.D x 40"L fused quartz tube (80 OD x 72 ID x 1000L mm)

    • Two fibrous ceramic tube blocks are included for blocking heat radiation from inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating)
    • Quartz block (Optional) is ideal for more cleanliness and higher achievable vacuum. 

     Heating Zone Length

    Two zones: each zone length 8" (200 mm)
    Total 16" (400 mm) heating zone

     Temperature Controllers

    • Two Precision Digital Temperature Controller, and each has 30-segement programm with alarm and overheating protection.
    • You can set up two zone at different temperature to create a thermal gradient for CVD deposition
    • or you can set up two zone at same temperature to create a longer constant temperature zone ( about 250mm )

     Temperature Accuracy

     ± 1° C

     Heating Element

      Fe-Cr-Al Alloy doped by Mo

    Fitting Ports

    On one end the flange has a valve, vacuum meter & 1/4" feedthrough attached, and on the other end has a valve & KF-25 Vacuum port.

     Dimension

       590 x 380 x 520 mm

     Warranty

      One year (No warranty on quartz tubes)

     Dimension after crating

      45x45x35"

     Certificate

       CE Certificate

    Note: Size can be customized as per our customers’ requirement
  • 17000C Tube Furnace

    1700<sup>0</sup>C  Tube Furnace India

    Dimension

    360mm (L) x 320mm (W) x 600mm (H)

    Weight

    28Kg (not including vacuum pump)

    Max. Operating Temp.

    1200°C  continuous
    1250 °C  ( for < 60 minutes )

    Heating Rate

    2-120°C

    Heating Element

    Fe-Cr-Al Alloy doped by Mo

     

    Working Region

    • inside camber size: 100mm dia. X 140mm H
    • Auto-lift and auto down sample tray.
    • Ceramic holder included.
    • Ceramic block (80mm H) and supporting plate are included

    Power

    1.6KW, 15A max.

    Voltage

    AC 110V or 220V 50/60Hz (Please select the voltage in the optional bar)

     

    Vacuum

    One oil-less vacuum pump is included.
    Vacuum Setting Value: 0 kpa ~   - 99kpa (20 Torr)  Max

    Temperature controller

    Design your program on Color LCD Screen:
    Idle, dry, preheat, Ramp up, dwell, Cooling down, 6 segments are programmable

    Vacuum:
    automatically control the vacuum on/off according to the user-defined value of temperature (vacuum start & stop temperature) and time (vacuum holding time)

    Venting System

    Gas inlet port
    Gas inlet port and filter have been installed on the left side of furnace.

    Warranty

    One year limited warranty (Consumable parts are not covered by the warranty

    Certificate

    CE certified

    Note: Size can be customized as per our customers’ requirement

1100度,双温区,管式,1100,℃,TWO,ZONE,T厂家哪家好?哪个厂家的1100度,双温区,管式,1100,℃,TWO,ZONE,T质量好啊? 西格马作为专业的1100度,双温区,管式,1100,℃,TWO,ZONE,T厂家,具有多年研发经验与多项专利,1100度,双温区,管式,1100,℃,TWO,ZONE,T价格合理、型号齐全、质量可靠。
400-600-3293