欢迎光临高温电阻炉厂家 - 洛阳高温电阻炉厂家

洛阳电炉 www.LyLuye.com

高温电阻炉实力制造商

20年高温电阻炉经验,50多项技术专利

全国免费咨询热线

400-600-3293

高温热循环炉\AIR CIRCULATING CHAMBER FURNACE

厂家:未知 发布日期::2020-09-16 09:29 浏览次数:

高温热循环炉

AIR CIRCULATING CHAMBER FURNACE WEIBER Air-circulation chamber furnaces with temperature range up to 850℃, are mainly used for annealing, tempering, ageing, pre-heating, drying, shrinking, baking and testing. These air circulation chamber furnaces are available for maximum operating temperatures of 450℃, 600℃ or 850℃ and are perfectly suited for demanding processes. Due to their robust and solid design even heavy loads can be heat treated. These furnaces are suited for use with baskets, pallets, and mobile furnace racks. All furnaces are available with electric or gas heating.

SIGMA High temperature thermal cycle furnace

The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:

Processing speed is high

Provides flexibility to alter the system by changing software.

Compact in size.

Operation and maintenance easier.

Maintain precise values

Range of temperatures 450℃, 600℃ or 850℃.

Over temperature protection.

Swinging door hinged on the right.

High-grade heating elements with long service life.

High-grade insulation with Low energy consumption.

Heating from bottom sides and top.

PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.

Digital output – Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.

Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value,thus ensuring correct measurement.

Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values.

Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.

Sturdy Construction - WEIBER furnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Air Circulating

Annealing Boxes

Feed and Charging Aid

Gas Fired System

Profile microprocessor based controller.

HMI+PLC based controller

RS 232/485 interface.

Temperature chart recorder

Provision for printer

Open and close updated through mobile network.

Extra thermocouple

Sample tray for 850oC model

Fan cooling to accelerate the cooling process.

Manual lift door

Pneumatic lift door.

Additional removable trays.

Roller conveyer in furnace for heavy samples.

Annealing Boxes: annealing boxes with lid sealing may be used for carburizing, annealing and hardening in neutral atmospheres, powder nitriding or boriding

Feed and Charging Aids.:By upgrading a furnace with useful accessories and devices for charging, you can considerably accelerate andsimplify your heat processing which increases your productivity.

Gas fired system:Direct gas heating or upon request with indirect gas heating with radiation tube, e.g. for heat treatment of aluminium.

 

WEIBER air circulating furnaces are Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double walled thick PCRC sheet, duly painted with attractive stove enamel. The inner casing is made of ceramic tiles.The unit is provided with single doorshinged on right side(pneumatic lift door is an optional feature).This door is provided with magnetic door closer. This door is provided with lock and key arrangement. The triple walled back of our air circulating are provided with two/Four/Six/Eight (size specific) air circulation fans for uniform maintenance of the temperature throughout the furnace.

 

Heating:

Heating elements are made of kanthal wire.The warm air is evenly distributed throughout the furnace through efficient motor fans ensuring very good temperature sensitivity.

 

Temperature Control:

The temperature inside our air circulating furnaces is controlled through PID temperature controller.

 

Temperature Range:

Temperature range of our air circulating furnace is 450-850o C. However we have the capacity to modify the same to 950oC tosuit the inpidual specialized requirements of our customers.

 

Air circulation:

Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the furnace.

 

Features of Coaxial Circulation Fan:

Vacuum impregnated stator winding with dr. back varnish under red baktol

Non-hygroscopic.

Best IR value

Bright bar (EN - 8 class) shaft.

Bush bearing of branded companies.

Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.

Pressure die-casted-rotor manufactured with zero error.

Boats of high accuracy

 

Voltage:

To work on 220/230V A.Csupply. .

Emperature range: 450°C

 

Volume

 

30Lt.

60Lt.

120Lt.

250Lt.

500Lt.

External dimension mm

W

607

667

767

1002

1152

D

1175

1250

1350

1636

1886

H

1315

1400

1500

1860

2010

Internal dimension mm

W

290

350

450

500

750

D

420

500

600

750

1000

H

260

350

450

600

750

Thermocouple

K type

K type

K type

K type

K type

Power requirements

220/230V/ 50Hz

220/230V/50Hz

220/230V/50Hz

220/230V/50Hz

220/230V/50Hz

Phase

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

Connected load

As per dimension

Temperature Controller

PID

Display

LCD/LED

  Safety thermostats

 

Automatic temperature setting

Yes

Adjustable limits

Yes

 

 

Volume

 

15Lt.

30Lt.

60Lt.

120Lt.

250Lt.

500Lt.

External dimension mm

W

470

607

667

767

1002

1152

D

845

1175

1250

1350

1636

1886

H

460

1315

1400

1500

1860

2010

Internal dimension mm

W

295

290

350

450

500

750

D

340

420

500

600

750

1000

H

170

260

350

450

600

750

Thermocouple

K type

K type

K type

K type

K type

K type

Power requirements

220/230V/ 50Hz

220/230V/ 50Hz

220/230V/50Hz

220/230V/50Hz

220/230V/50Hz

220/230V/50Hz

Phase

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

Connected load

As per dimension

Temperature Controller

PID

Display

LCD/LED

  Safety thermostats

 

Automatic temperature setting

Yes

Adjustable limits

Yes

    Temperature range: 650°C

Volume

 

30Lt.

60Lt.

120Lt.

250Lt.

500Lt.

External dimension mm

W

607

667

767

1002

1152

D

1175

1250

1350

1636

1886

H

1315

1400

1500

1860

2010

Internal dimension mm

W

290

350

450

500

750

D

420

500

600

750

1000

H

260

350

450

600

750

Thermocouple

K type

K type

K type

K type

K type

Power requirements

220/230V/ 50Hz

220/230V/50Hz

220/230V/50Hz

220/230V/50Hz

220/230V/50Hz

Phase

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

1Ø or 3 Ø (as needed)

Connected load

As per dimension

Temperature Controller

PID

Display

LCD/LED

  Safety thermostats

 

Automatic temperature setting

Yes

Adjustable limits

Yes

    Temperature range: 850°C
高温热循环炉厂家哪家好?哪个厂家的高温热循环炉质量好啊? 西格马作为专业的高温热循环炉厂家,具有多年研发经验与多项专利,高温热循环炉价格合理、型号齐全、质量可靠。
400-600-3293