1200度可倾斜可旋转开合式管式炉为洛阳西格马高温电炉可生产的可倾斜旋转管式加热炉，可倾斜可旋转开合式管式炉可配自动进料机，1200℃可倾斜式旋转管式炉可360度旋转，管壁内有石英挡片帮助粉料翻转有助于烧结的更均匀，专业用于电池正负极材料，无强酸碱性粉体材料，颗粒状物料的实验室煅烧及干燥，用户可根据所要烧制的材料选择在真空下或者气氛保护下进行烧制。连接气路管道的情况下依然可以旋转石英管。

The range of SIGMA horizontal rotating tube furnaces offers the benefits of simultaneous heating and mixing of the sample, in addition to the use of an inert atmosphere.

西格马旋转管炉除了使用惰性气氛外，还可同时加热和混合样品。

The furnaces are suitable for continuous material processing. Residence time in the heated zone depends on the degree of inclination and the rotating speed (which can be controlled by the customer) and the length of the working tube, in addition to the flow properties of the material.

该可倾斜可旋转开合式管式炉可用于连续材料加工。加热区内的停留时间取决于倾斜程度、转速（客户可控制）和工作管长度，以及材料的流动特性。

The design of the split furnace, drive system and feeder/ collection assemblies allows the work tube to be easily removed and replaced.

分体式炉、驱动系统和进料/收集组件的设计使工作管易于拆卸和更换。

The single zone and 3-zone split tube furnaces have a maximum operating temperature of 1150 ℃. All models are available with heated lengths of either 600 mm or 900 mm. The angle of inclination can be easily adjusted between horizontal and 10 °. The ceramic (IAP) work tube has an inner diameter of 75 mm. A safety switch automatically prevents heating and tube rotation when the furnace is opened.

单区三区裂解管炉的设计运行温度为1150℃。所有型号都有600 mm或900 mm的加热长度。倾斜角度可在水平和10°之间轻松调整。陶瓷（IAP）工作管内径75mm。当炉打开时，安全开关自动防止加热和管旋转。

It is essential to discuss your application with Sigma to ensure the suitability of the material for use in this equipment. sigmao cannot accept responsibility for your process due to the possibility of the material becoming sticky when heated and therefore not flow through the work tube.

必须与Sigma 讨论您的应用，以确保材料在本设备中的适用性。由于材料在加热时可能变粘，因此不会流过工作管，因此，西格马无法对您的工艺负责。

标准参数

1150 ℃ maximum operating temperature; normal operating temperature range 650 ℃ - 1050 ℃

1150℃设计工作温度；正常工作温度范围650℃-1050℃

Heated lengths of 600 mm and 900 mm

加热长度600 mm和900 mm

Single zone models fitted with Sigma 301 PID controller with single ramp to setpoint

单区模型配备Sigma 301 PID控制器，带有单匝道至设定值

3-zone models: Centre zone fitted with 301 PID controller. End zones fitted with 2132 slave controllers

3区型号：中心区配有301 PID控制器。端部区域，配有2132个从控制器

Single or 3-zone models

单区或三区型号

Accepts work tube with inner diameter of 75 mm

接受内径为75mm的工作管

Adjustable inclination and rotation speeds offers flexibility of residence time

可调节倾斜和转速，提供灵活的停留时间

Work tube rotation speed 1.5 to 10.0 revolutions per minute

工作管转速1.5至10.0转/分钟

5 litre capacity vibratory feeder and hopper

5升容量振动给料机和料斗

The temperature controllers and associated equipment are housed within the integral control box

温度控制器和相关设备安装在整体控制箱内

Wire elements in high quality vacuum formed insulation ensure fast heat up, excellent temperature uniformity and short cool down times

质真空成型绝缘中的丝元件，保证快速升温，良的温度均匀性，缩短冷却时间

选项(订购时详细标注要求)

选项(订购时详细标注要求)

Quartz (up to 1100 ℃) or metallic (up to 800 ℃) work tubes

石英（设计1100℃）或金属（设计800℃）工作管

5 litre capacity heavy duty vibratory feeder and hopper

5升容量重型振动给料机和料斗

Inert gas packages available on request

根据要求提供惰性气体包

可倾斜旋转管式加热炉

电阻炉厂家信息

咨询电话：

公司电话：

传真号码：0379-6511-2868

公司Q Q： 2817-875916

公司邮箱：2817-875916@qq.com

地址：洛阳实验电炉生产厂家